Consort SLPIR Motion Activated Runback Timer
The SLPIR allows your heater to increase the room temperature to a comfortable designated setting, from up to 5 metres away.
If the motion detector is not triggered by a predetermined time, then the heater will either switch off or the temperature will be held at a lower background level.The SLPIR controller is designed to control multiple SL heaters or SL receivers within the RF signal range.
Features & Benefits
- Motion sensor range of up to 5 metres
- Detection area: 60 degrees vertical, 120 degrees horizontal
- Controller acts as a run-back timer where a full heating period is activated when the controller detects movement
- Choice of 4 time periods: 5, 15, 30 and 60 minutes
- Comfort heat setting between 15°C to 35°C
- Setback temperatures can be used for frost protection or maintaining a minimum room temperature 0°C to 15°C
- 4 segment light indicator which counts down the time
- Easy operation
- Fits onto most standard single gang box
Deciding on the right type of
Heating Controls is a key decision. After you determine that
Electric Heater Controls provide the best solution then the Consort SLPIR Motion Activated Runback Timer is absolutely worth seriously thinking about.
