Fernox 22mm Compression Magnetic Scale Reducer

The Fernox Magnetic Scale Reducer is not a water softener but it encourages coagulation whilst the water hardness remains unchanged.

The Fernox in-line Magnetic Scale Reducer range is suited to single appliance protection and is most notably used to protect the boiler against the damaging effects of scale. It is easily connected onto 15mm or 22mm pipework and requires no further maintenance, while the positive effects continue for up to 10 years, dependent on water usage levels.

Features & Benefits

• An in-line scale reducer to prevent the build-up of scale using magnetic principles
• Single appliance protection
• A brass, nickel plated unit
• No maintenance
• Lasts for up to 10 years*
• WRAS approved product
• No need for an earth bond strap

Mandatory Part L Legislation Update

Protect

Protect all systems against corrosion, scale, and microbial fouling in low-temperature systems

Part L of the Building Regulations (England and Wales)

Part L of the Building Regulations (England and Wales) states that in hard water areas which exceed 200ppm, provision should be made to treat feed water to water heaters and hot water circuits of combination boilers to reduce the rate of limescale formation as well as limiting its harmful effects on energy efficiency. One way to comply with this legislation is to install a Fernox Electrolytic Scale Reducer.

Best practice also encourages the use of Scale Reducers.

Making the decision on the most suitable kind of Water Treatment is a key decision. Once you decide that Scale Inhibitors give the appropriate solution then the Fernox 22mm Compression Magnetic Scale Reducer - 62302 is no doubt worth putting on the shortlist.