Gledhill Economy 7 Indirect Vented Combination Cylinders
Indirect - Heated via an external heat source such as a boiler. Can also be heated via an electric immersion heater.
Open Vented - Conventional Cylinder, fed by a header tank in the loft.
The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced.
Gledhill Economy 7 Direct Vented Hot Water Cylinders at PlumbNation are a range of electrically heated traditional vented hot water cylinders designed to make the most of electric off-peak tariffs. Gledhill Vented Cylinders are desgined to supply hot water for single or multi bathroom properties and are available in standard capacities from 120 litre to 210 litre.
- Supplied complete with factory fitted cold water inlet baffle to improve hot water draw off
- EnviroFoam insulation - environmentally friendly
- Re-heat time of 25 minutes
- Incredibly light - weighing as low as 12kg (smaller models)
- Compliant with 2010 Part L Building Regulations
- 100% recyclable
- Low standing heat loss
- Wide range of sizes available
- Fast delivery
- 10 Year Manufacturers Guarantee
Image is for illustrative purposes only. Product may differ slighty from image.
Insulation adds 70mm to the diameter of the Cylinder
Please note - Vented Cylinders are not supplied with an immersion.
Picking the most suitable kind of Cylinder is a key decision. After you decide that
Indirect Combination Cylinders provide the appropriate solution then the Gledhill Economy 7 FTI210 Indirect Vented 1800mm x 450mm EnviroFoam Combination Cylinder 210/30 Litre - BEICT10 is unquestionably worth seriously thinking about.
* 