Gledhill Stainless Lite Plus Unvented Indirect Cylinder 180 Litre
Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.
The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil's corrugated design gives much faster recovery times than can be achieved with plain tube coils.
All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)
Features and Benefits:
- Designed for use with gas or oil boilers, either sealed system or open vented
- High efficiency corrugated coil maximises heat transfer to the cylinder of water
- Corrugated coil provides faster reheat times compared to plain coil
- Supplied with full NSF WRC and WRAS independent approvals
- 90° elbow and drain valve supplied as standard
Deciding on the right kind of Cylinder is a key decision. When you decide that
Indirect Unvented Cylinders deliver the correct solution then the Gledhill Stainless Lite Plus Unvented Indirect Cylinder 180 Litre - PLUIN180 is clearly worth your consideration.
* 