Gledhill Stainless Lite Plus Unvented Indirect Cylinders

Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil's corrugated design gives much faster recovery times than can be achieved with plain tube coils.

All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Deciding on the most suitable sort of Cylinder is an important decision. Once you determine that Indirect Unvented Cylinders give the right answer then the Gledhill Stainless Lite Plus Unvented Indirect Cylinder 300 Litre - PLUIN300 is assuredly worth putting on the shortlist.