Factory assembled, these unvented stainless steel cylinders come pre-plumbed and pre-wired. Saving up to 70% fitting time on-site for a fast hassle-free installation and setup. Fitted with high efficiency EuP "A" rated pump, two port valves, an automatic bypass and a balancing valve, all units are also supplied with programmer and room stat.
With excellent ErP ratings, these cylinders come with up to 45% additional insulation to provide superior heat loss performance and maximum efficiency. The built-in thermal expansion space eliminates the need for an external expansion vessel and high recovery heat exchangers ensure fast heat up times. The cylinders are manufactured from Duplex stainless steel for exceptional resistance to all forms of corrosion.
Please note - These cylinders are NOT suitable for installation with a system boiler.
- Up to 70% faster to install
- ErP 'A' Rated for 120L and 150L Cylinders
- EuP compliant pump with an "A" rating for energy efficiency
- Up to 45% extra insulation for reduced heat loss
- Built-in thermal expansion space removing the need for an external expansion vessel
- Side mounted hot water outlet reduces heat loss, provides better access and enables the cylinder to be installed under shelving or other equipment
- Suitable for fully pumped circulation and sealed primary systems. Not suitable for gravity circulation
- Wide range of capacities - from 120 to 300 litres
- Separate central heating and hot water zones for maximum efficiency
Selecting the correct kind of Cylinder is an important decision. Once you decide that Pre Plumbed Unvented Cylinders provide the right answer then the Range Tribune Xe Pre - Plumbed 250L Twin Zone Indirect Unvented Cylinder - TXN250PTERP is without doubt worth seriously thinking about.
* 