Key features:

• Cold water supply connection only
• Instant hot water provided to basins
• 4-6 litres per minute flow rate
• Fits inside a cupboard or underneath a basin

The Powerstream provides instant hot water at specific points of use, making it an excellent choice for hand basins in both commercial and residential settings. Its compact and innovative design eliminates the need for lengthy pipe runs to a centrally stored water cylinder, saving space, and energy, and simplifying installations.

Designed to accommodate up to two hand basins, the unit connects to a cold mains-fed water supply, heating water instantly and delivering it within a temperature range of 29-54 degrees, depending on the incoming water temperature. Not only does it provide hot water on demand, but it also does so at a flow rate of 4-6 litres per minute. For instance, with a cold water input temperature of 12 degrees Celsius, the RP10.8 will produce hot water at 51 degrees Celsius at a rate of 5 litres per minute.

Additional features:

• Avoids the requirement for long pipe runs to a centrally located cylinder
• Water temperature Range:31-58 degrees dependent on incoming water temperature
• Recommended for use with manual spray taps or non-thermostatic mixer taps
• Unvented instantaneous water heater
• Corrosion-resistant steel back plate
• Half power selection available at installation
• A fantastic 2-year warranty

Technical information:

• Operating Pressure: 1- 10 bar
• Water connections: 15mm straight shank inlet and outlet pipes
• Cable: 6-10mm cable size (45amps) Cable depends mainly on how long the run of cable is from the fuse board to water heater
• Energy rating: A
• Measurements: 307mm (w) 160mm (h) 72mm (d)
• BEAB Approved and IIPX4 Rated

Please note that this unit is not for filling baths or kitchen sinks, and cannot be used with thermostatic taps.