Viessmann Vitocal 222-A A08 7.0kW Heat and Cooling Pump (inc Cylinder)
The Viessmann Vitocal 222-A A08 7.0kW Heat and Cooling Pump is a compact air/water monobloc heat pump unit which utilises the heat from the outdoor air for environmentally responsible and cost effective heating. The Viessmann Heat Pump operates by capturing heat from outside which is then moved into your home. It the uses electricity to do this, however the quantity of heat delivered into your home is much greater than the quantity of electricity used to power the system.
The indoor unit is a sleek stylish heating water buffer cylinder with 42 litre capacity attached to the rear for systems with very low heat draw off in summer and in the transitional period. It comes with hydraulics and a controller that provides low noise levels which can be installed close to the living space. The pipes connecting to the outdoor unit are filled with water, therefore, installation does not require the installer to hold F-gas refrigeration certification as it is a non-refrigerant circuit.
The monobloc outdoor units provide a sleek design which allow them to blend in with all homes with its timeless design. The single or double fan units are developed and manufactured in house, in addition to excellent performance levels.
The heat pump can be controlled from anywhere using the Vitotronic 200 control unit, via the Vitoconnect web interface and the free ViCare app.
Key Features And Benefits:
- Sleek Compact Monobloc Design
- Heating And Cooling In One Unit - Thanks To Reversible Switching
- Advanced Acoustic Design - Makes For Quiet Operation
- High Quality And Durable Unit With Timeless Design
- High DHW Convenience
- Easy To Operate Vitotronic Control Unit
- No Refrigeration Leakage Tests Needed
- No Minimum Distances Between Indoor And Outdoor Units
VITOCAL 200-A Indoor Unit
- Indoor instantaneous water heater
- 3-way diverter valve
- Secondary Pump
- Flow Monitor Feature
- Enamelled 220L DHW cylinder
- Vitotronic 200 Control Unit
VITOCAL 200-A Outdoor Unit
- Increased Efficiency with Corrugated Fins
- Power Saving DC Fan Unit
- Speed-controlled scroll compressor
- Electronic Expansion Valve
- 4 Way Reversing Valve
- Condenser
Dimensions Listed Are For Indoor Unit Only.
Deciding on the right type of Heat Pump is a key decision. Once you determine that
Air Source Heat Pumps provide the appropriate answer then the Viessmann Vitocal 222-A A08 7.0kW Heat and Cooling Pump (inc Cylinder) - Z017311 is no doubt worth a serious look.
* 